Geq (Graphic Eq) Functions; Using The Internal 31 Band Graphic Eq On The Output Channels; Geq Parameter - Yamaha CS1D Owner's Manual

GEQ (graphic EQ) functions

Using the internal 31 band graphic EQ on the output channels

GEQ PARAMETER

[Function]
In this screen you can make settings for the twenty-four 31-band graphic EQ modules that are provided for
insertion into input/output channels. Here you can assign signal routes, specify the boost/cut amount for
each band, and make notch filter settings, etc.
Console
In the LCD FUNCTION ACCESS
block, press the [GEQ] switch (press
repeatedly until the screen shown at
the right appears)
Display
MENU button GEQ button
GEQ PARAMETER tab
[Screen functions]
1 MODULE
Select the desired module of the twenty-four graphic
EQ modules (GEQ 1–GEQ 24).
When you click this button, the GEQ SELECT popup
window will appear.
2 INSERT
Select the signal route into which this module will be
inserted.
When you click this button, the GEQ PATCH
SELECT popup window will appear.
The following signal routes can be selected.
INPUT 1-96 INS
Insert In/Out of input channels 1–96
1 2
GEQ (graphic EQ) functions
3 4
MIX 1 INS–MIX 48 INS
Insert In/Out of MIX channels 1–48
MTRX 1 INS – MTRX 24 INS
Insert In/Out of MATRIX channels 1–24
ST A [L/R] INS
Insert In/Out of the STEREO A channel (L/R)
ST B [L/R] INS
Insert In/Out of the STEREO B channel (L/R)
If you insert into the STEREO A/B channel or into a
pair of input channels or MIX channels, adjacent
odd-numbered even-numbered modules will be
assigned automatically.
13