Safe Section; Channel Select Section - Yamaha CS1D Owner's Manual

CS1D Reference Manual (Hardware)

SAFE section

This section sets/defeats Recall Safe and Mute Safe for the currently selected output channel.
1 SAFE [RECALL] switch and LED
This switch sets/defeats Recall Safe for the currently
selected output channel (MIX, MATRIX, STEREO
A/B); a state in which the channel will not be affected
by scene recall operations.
The switch LED will light for channels for which
Recall Safe is selected.
The parameters of a channel whose LED is lit will not
change even if a scene memory is recalled.

CHANNEL SELECT section

This section selects the channel that will be controlled in the SELECTED OUTPUT CHANNEL block.
2
5
4
1 CHANNEL SELECT [NAME]/[NUMBER] indicator
2 CHANNEL SELECT [ST]/[MATRIX]/[MIX]
switches and LEDs
The CHANNEL SELECT [NAME]/[NUMBER] indi-
cators show the short name and number of the cur-
rently selected channel.
The [ST]/[MATRIX]/[MIX] switches select the
channel group (STEREO A/B, MATRIX, MIX). (The
LED of the currently selected switch will light.)
When a STEREO A/B channel is selected
The [ST] LED will light, and the [NUMBER] indi-
cator will show either AL (L channel of STEREO
A), Ar (R channel of STEREO A), bL (L channel of
STEREO B), or br (R channel of STEREO B).
When a MATRIX channel is selected
The [MATRIX] LED will light, and the [NUM-
BER] indicator will indicate the number 1–24.
66
12
DCA
RECALL
MUTE
SAFE
ST
MATRIX
CHANNEL
COPY
MIX
CHANNEL SELECT
SELECTED OUTPUT CHANNEL
1
2
2 SAFE [MUTE] switch and LED
This switch sets/defeats Mute Safe for the currently
selected output channel (MIX, MATRIX, STEREO
A/B); a state in which the channel will not be affected
by mute groups.
The switch LED will light for channels for which
Mute Safe is selected.
Channels whose LED is lit will not change even if a
mute group to which that channel belongs is muted.
SHIFT
DEC INC
When a MIX channel is selected
The [MIX] LED will light, and the [NUMBER]
indicator will indicate the number 1–48.
3 CHANNEL SELECT [ /DEC]/[ /INC] switches
These switches increment or decrement the currently
selected channel number within the channel group
selected in 2 (MIX, MATRIX, STEREO A/B). For
details on operation, refer to page 58.
Hint
If you hold down either of the CHANNEL SELECT
[ /DEC]/[ /INC] switches, the number will
change continuously.
If you hold down both of the CHANNEL SELECT
[ /DEC]/[ /INC] switches for one second, channel
1 of that group (or the L channel of STEREO A) will
be selected.
1
3