Cue/Solo Groups - Yamaha CS1D Owner's Manual

CS1D Operating Manual (Basic Operation)

Cue/Solo groups

The cue/solo signals of the PM1D system can be categorized into the following three groups.
INPUT CUE group
These are the cue/solo signals of the input channels.
They are enabled when the [CUE] switch of an input
channel or ST IN channel is pressed.
Input channel [CUE] switch
ST IN channel [CUE] switch
DCA CUE group
These are the cue/solo signals of the DCA groups.
They are enabled when a [CUE] switch in the DCA
GROUP block is pressed.
DCA GROUP block [CUE] switch
10
Hint
For details on DCA groups, refer to "Chapter 7. DCA
groups/Mute groups."
116
CUE
CUE
11 12
OUTPUT CUE group
These are the cue/solo signals of output channels.
They are enabled when the [CUE] switch of a MIX
channel, MATRIX channel, or STEREO A/B channel
is pressed.
MIX/MATRIX channel [CUE] switch
STEREO A/B channel [CUE] switch
CUE
ST OUTPUT ST OUTPUT
A
It is not possible for the [CUE] switches of these
three groups to be on simultaneously. The group
for the last-pressed [CUE] switch will be given pri-
ority, and the cue/solo signals of that group will be
enabled.
For details on cue operation, refer to "CS1D Refer-
ence Manual (Hardware)" ( p.81).
CUE
B