I/O Unit Section - Yamaha rivage pm10 Operation Manual

Input Channels  I/O unit section
Input Channels

I/O unit section

+48V MASTER
ON
I/O Rack
+48V
ON
RY Card Slot
RY16-ML-SILK
2
GAIN
+48V PEAK METER
COMPENSATION
ON OFF
2
SIGNAL
1 +
Silk HPF
AD
-
3
ON
TRIM
ANALOG INPUT GAIN
1
3 4
RY16-AE
2
1
SRC
3
4
MY card MY Card Slot
4
HY slot2 HY Card Slot
1 ANALOG INPUT GAIN
This is the analog gain of the head amp.
2 Silk
Allows you to add a natural sense of audio transformer compression and saturation.
This enhances the sense of depth and space, freshening the sound.
You can control the brilliance or power.
About "Silk"
Silk uses proprietary Yamaha "VCM technology" digital signal processing to faithfully
replicate the "Silk" processing that is built into numerous high-end analog audio devices
developed, manufactured, and sold by Rupert Neve Designs.
Based on the natural compression and saturation of audio transformers, a matter about which
Rupert Neve is especially passionate, the user can choose one of two characters, "Blue" or
"Red, " and use a continuously-variable "Texture" knob that allows effective control over the
tone and the accompanying overtones.
Silk allows effects such as the following.
• In addition to adding power and brilliance, you can recover the sense of air that tends to be
lost in the mix.
TWINLANe Network (400 Ch)
DSP Engine
METER
MS-
DECODE
5
HY
A/B
METER
slot1
input
256
A
MS-
DECODE
B
HY
5
slot1 VSC*
256
METER
METER
* Virtual Sound Check
• The graceful and solid tone characteristic of an analog console can be obtained.Breathing
and subtle pianissimos can be expressed in a lifelike way.
• Channel EQ and reverb become more effective.
• If this is used only on a small number of important channels, those parts will stand out from
the mix.
• If this is used on all channels, the mix will be given depth and three-dimensional character.
Red: Bright and lively
Blue: Rich and powerful
About the "Hybrid Mic Preamp" concept
This is a revolutionary mic preamp that uses digital signal processing to model and combine
the ultra-high-quality analog mic preamp representing the pinnacle of Yamaha's "natural
sound" philosophy with Rupert Neve Designs' "Silk" processing that allows you to freely
control the sound's "depth, space, and air. " In the RIVAGE PM10 system, this is provided as
standard on the RY16-ML-SILK and on all the OMNI INPUT channels on the rear panel of
the CS-R10.
3
GAIN COMPENSATION
Switches the gain compensation on or off for that channel.
If this is on, the signal level that is output from the I/O rack to the audio network (slot) remains
constant even if the HA analog gain is adjusted.
About gain compensation
The HA analog gain of the I/O rack can be controlled by the gain knob of the control surface,
but normally this will also change the input level to another DSP engine or recording device
that shares the input.
However if gain compensation is used to fix the gain within the I/O rack, the signal level that
is output to the audio network is kept constant. In other words, raising (or lowering) the
analog gain causes the compensation gain within the I/O rack to decrease (or increase).
Because the mixing input level can be operated using the digital gain within the DSP engine,
this allows the input level to be optimal for various routes used for different purposes.
Even if you turn gain compensation off again, the analog gain and compensation gain will
return to the settings they had when gain compensation was turned on, so the signal level that
is output to the audio network will not change.
In this way, you can adjust the analog gain for the optimal S/N ratio and use the digital gain to
adjust the input level independently.
4 Ø
Reverses the phase of the input signal.
5 MS-DECODE
An MS decoder is built in.
The MS decoder is provided for adjacent odd- and even-numbered channels.
17
FAQ
CONTENTS
RIVAGE PM10 Operation Manual