Setting Your Machine; Network Parameters - Kyocera KM-F1060 Operating Instructions Manual

Setting Your Machine

Network Parameters

When your machine is used as a Network Printer, the following parameters should be set properly in
advance.
• IP Address
• Subnet Mask
• Default Gateway IP Address
If your network has already been setup with DHCP service, set the Fax Parameter No. 169 (DHCP CLIENT)
to Valid so that the parameters are set automatically. (For details, see the Operating Instructions for
Facsimile and Copy Functions)
Follow the procedures below if you need to set the parameters manually.
1
2
3
4
5
6
7
8
9
10
82
Make sure that the
PRINT
EMAIL lamp is OFF.
repeatedly until the display shows;
Enter the IP Address. Use the
period.
Enter the Subnet Mask. Use the
Enter the Default Gateway IP Address. Use the
to enter a period.
, and
SCAN/FILE
key to enter a
key to enter a period.
key
SET MODE (1-9)
∨ ∧
ENTER NO. OR
1:USER PARAMETER?
PRESS SET TO SELECT
IP ADDRESS
IP ADDRESS
133.178.240.3
SUBNET MSK
SUBNET MSK
255.255.255.0
DEF. GATEWAY IP ADDR
DEF. GATEWAY IP ADDR
133.178.240.0