Connection Configurations (For The Network Connected Models) - Kyocera KM-F1060 Operating Instructions Manual

Connection Configurations (For the Network Connected Models)

For the Network Connected Models
There are two types of Document Fax configurations, Simple Send Only System and Send & Receive
Network Shared System.
Simple Send Only System
• Peer To Peer Connection
• Email Server Not Required
Send & Receive Network
• Shared Network Connection
• Email Server and RX Email
Account Required
Note:
*1: The result of the Simple Send Only System transmission with Group 2 Device models (refer to the list of
compatible models in the previous section), the Send Log and TX Confirmation Notice confirms the
transfer to the device only. The only way to confirm whether it reached the final destination is with a
transaction journal of the device. (PAGES column on the Transaction Journal is mentioned as a hyphen
"-".)
*2: The result of the Simple Send Only System and Send and Receive System transmission with Group 1
Device models and all other compatible models, is reflected in the Send Log and TX Confirmation
Notice. (Actual Pages Sent)
Simple Send Only System Connection Diagram
Transmit
150
Device Setting
• IP Address settings
• Relay XMT Password setting
• Relay XMT Report = Off setting*1
• IP Address settings
• Relay XMT Password setting
• Relay XMT Report = Always setting*2
• Internet Fax setting
• Fax Forward setting
aaa bbb
Transfer Fax Data
PC Fax Setting
• Relay XMT Password setting
• For the Server PC
- Email Address settings
- Relay XMT Password setting
- Server setting
- POP Receive setting
- For the Client PC
- Search Shared Server setting
aaa bbb
Send FAX