Installing The Hard Drive Fan; Removing The Power Supply Unit (Psu) Card - Dell Precision T7600 Owner's Manual
Precision workstation
Hide thumbs
Also See for Precision T7600:
- Setup & features manual (8 pages) ,
- Owner's manual (65 pages) ,
- Technical manualbook (51 pages)
Table of Contents
Advertisement
Figure 64.
Installing the Hard Drive Fan
1.
Install the screws that secure the hard drive fan to the front of the chassis.
2.
Route the hard drive fan cable through the chassis and connect it to its slot on the system board.
3.
Install:
a) PCI card
b) left cover
c) right cover
4.
Follow the procedures in
Removing the Power Supply Unit (PSU) Card
1.
Follow the procedures in
2.
Remove the right cover.
3.
Disconnect all the cables connected to the PSU card.
42
After Working Inside Your Computer .
Before Working Inside Your Computer .
Hide quick links:
Advertisement
Table of Contents
