Installing The Heat-Sink Fan; Removing The System Fan - Dell Precision T7600 Owner's Manual
Precision workstation
Hide thumbs
Also See for Precision T7600:
- Setup & features manual (8 pages) ,
- Owner's manual (65 pages) ,
- Technical manualbook (51 pages)
Table of Contents
Advertisement
Figure 34.
Installing the Heat-Sink Fan
1.
Slide the heat-sink fan into heat sink assembly.
2.
Plug in the grommets to secure the heat-sink fan to the heat sink assembly.
3.
Install:
a) heat sink
b) left cover
4.
Follow the procedures in
Removing the System Fan
1.
Follow the procedures in
2.
Remove:
a) left cover
b) optical drive
3.
Remove the screws that secure the optical-drive bracket.
Figure 35.
4.
Push the air duct in the direction indicated to unhinge it from the system fan module.
26
After Working Inside Your Computer .
Before Working Inside Your Computer .
Hide quick links:
Advertisement
Table of Contents
