Installing The Intrusion Switch; Removing The Pci Card - Dell Precision T7600 Owner's Manual

4. Push the intrusion switch downwards and remove it from the computer.
Figure 14.

Installing the Intrusion Switch

1. Install the intrusion switch into its place holder on the chassis.
2. Route the intrusion switch cable around the chassis clips and install the connector to the system board.
3. Install the left cover.
4. Follow the procedures in

Removing the PCI Card

1. Follow the procedures in
2. Remove the left cover.
3. Open the plastic latch fastening the PCI card in its slot.
Figure 15.
4. Press down the latch and pull the PCI card away from the computer.
16
After Working Inside Your Computer .
Before Working Inside Your Computer .