Installing The Heat Sink; Removing The Heat-Sink Fan - Dell Precision T7600 Owner's Manual
Precision workstation
Hide thumbs
Also See for Precision T7600:
- Setup & features manual (8 pages) ,
- Owner's manual (65 pages) ,
- Technical manualbook (51 pages)
Table of Contents
Advertisement
Figure 32.
Installing the Heat Sink
1.
Place the heat sink inside the computer.
2.
Tighten the captive screws to secure the heat sink to the system board.
3.
Connect the heat-sink cable to the system board.
4.
Install the left cover.
5.
Follow the procedures in
Removing the Heat-Sink Fan
1.
Follow the procedures in
2.
Remove:
a) left cover
b) heat sink
3.
Push the grommets outward to release the heat-sink fan from the assembly.
Figure 33.
4.
Remove the heat-sink fan from the heat sink assembly.
After Working Inside Your Computer .
Before Working Inside Your Computer .
25
Hide quick links:
Advertisement
Table of Contents
