Ulead VIDEO STUDIO 7 Manual page 54

VIDEOSTUDIO HELP
Table of Contents | Index
7. Click Capture Video.
8. Batch capture starts based on
all or selected (if any) tasks.
The process stops when the last
task is captured. A report is
displayed for your reference.
Capturing still images
In addition to video, VideoStudio also allows you to capture still
images. The image format can be BMP or JPEG, and the size
depends on its source video. To choose your image format, click File:
Preferences. In the Preferences dialog box click the Capture Tab and
set the format.
To capture still images:
1. Connect your camcorder or
VCR to your capture card.
Switch it on and set it to Play
(or VTR / VCR) mode. Check
your device manual for specific
instructions.
2. Open a new project.
3. In the Capture Step, click Play
in Navigator.
4. When you get to the part of the
video you want to record, click
Capture Image on the Capture
Settings Tab in the Options
Panel.
Note: It is up to you whether to
click Stop before starting Batch
capture. However, if you need to
modify some tasks, click Stop first
to help VideoStudio prioritize
capturing tasks.
Back 54