Ulead VIDEO STUDIO 7 Manual page 48

VIDEOSTUDIO HELP
Table of Contents | Index
5. Go to the Navigator and click
Play. Click Capture Video to
begin recording.
6. Click Stop Capture or press
[Esc] to stop capturing.
Selecting a profile
The quality of a WMV file depends on the profile it is using. A
Profile covers various attributes for a Windows Media Format file
such as bit rate, number and type of streams, compression quality,
frame size and so on. When capturing a video directly to WMV
format, VideoStudio uses the default profile to complete the
capturing process. You also have the option to select other profiles
to attain preferred captured file quality.
To select a profile:
1. Connect your DV camcorder
to your IEEE-1394 capture
card.
2. Turn your camcorder on and
set it to Play mode.
3. In the Capture Step, select
WMV from the Format list.
4. Click Options: Video Capture
Property Settings. In the dialog
box, click Select to open Select
Profile.
5. Select the profile you want to
use for capturing. The
generated WMV file will
depend on the profile that you
pick. Click OK.
Note: You also have the option to
select a different profile to use for
capturing DV video into WMV. See
the next section for details.
Note: When acquiring video from
an analog source, be sure that the
analog capture card you are using
supports RGB or YUV capture.
Back 48