Ulead VIDEO STUDIO 7 Manual page 93

VIDEOSTUDIO HELP
Table of Contents | Index
Recording back to a DV camcorder
The most exciting thing about DV is that it can be copied from
your camcorder to your computer, and then back to your camcorder
(after editing) without any loss of quality. VideoStudio offers
comprehensive support for DV in all of its manifestations on the
market. This includes, but is not limited to, Type-1, Type-2, PAL,
NTSC, and even the device control of your camcorder.
To record a movie to your DV
camcorder:
1. Turn your camcorder on and set it
to Play mode (or VTR / VCR
mode). See your camcorder's
manual for specific instructions.
2. Select a compatible DV AVI file
from the Library. If you want to
use a project, make sure you have
already rendered it using Create
Video File.
3. Click the Share Step.
4. Click Export: DV Recording.
5. The DV Recording - Preview
Window dialog box opens. Click
Next.
6. In the DV Recording - Record
Window dialog box, click DV
recording to begin recording to
the DV camcorder.
7. Click Finish.
Note: Before recording a video file back
to your DV camcorder, make sure the
video is saved with the correct codec.
For example, the codec DV Video
Encoder - Type 1 usually works well for
most NTSC DV camcorders. You can
select it from the Compression Tab in
the Video Save Options dialog box.
Back
DV Recording - Preview Window
dialog box
DV Recording - Record Window
dialog box
93