Selecting A Location To Restore To - ACRONIS TRUE IMAGE 8.0 User Manual

Select a partition to restore
During a single session, you can restore several partitions or disks, one by one, by
selecting one disk and setting its parameters first and then repeating these actions
for every partition or disk to be restored.
Select the necessary partition and click Next.
5.4

Selecting a location to restore to

As a rule, you should restore an image to the same partition from which that the
image was created.
It is possible to restore an image to another partition. A partition should be at least
the same size as the uncompressed image data.
Copyright © Acronis, Inc., 2000–2004
Restoring a disk (partition) from an image
29