Restoring a disk (partition) from an image
Select partition to restore image to
All the data stored on the restored partition will be replaced by the image data, so be careful
and watch for non-backed-up data that you might need.
5.5
Selecting partition type
When restoring a partition, you can change its type, though it's not required in most
cases.
To explain why you might need to do this, let's imagine that both OS and data were stored on the
same primary partition on the damaged disk. You are forced to restore the partition from a backup
to another hard disk with its own partitions and OS.
Select partition type
30
Copyright © Acronis, Inc., 2000–2004