Table of Contents
Advertisement
Select an item of the list with the Up or Down keys and move the device up the list
or down it with help of + or - keys. This will change the boot sequence. For
example, you can select the boot sequence as the one shown below:
Main
Advanced
1. Removable Device
2. ATAPI CD-ROM
3. IDE Hard Drive
4. Other Boot Drive
Plug & Play O/S
Boot Virus Detection
Quick Power On Self Test
Boot up Floppy Seek
Full Screen Logo
F1
Help ↓
Esc Exit
←→ Select Menu Enter Select Sub-Menu F10 Save and Exit
After setting the specified parameters, use the Left or Right keys to select the
Exit menu item. Reply positively to the prompt on saving the specified
parameters.
For AwardBIOS for motherboards for Pentium, Pentium Pro processors (i.e the ones
older than those described above) and AMD-K5/K6, the standard CMOS setup
screen looks like this:
Copyright © Acronis, Inc., 2000–2004
AwardBIOS Setup Utility
Power
Boot
[Legacy Floppy]
[None]
[IBM-DTLA-307020]
[Disabled]
[No]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Item
-/+
Change Values
Appendix B Hard disks and BIOS setup
Exit
Boot Sequence:
<Enter> to select the de-
vice To select the boot se-
quence, use up or down Ar-
row.
Press <+> to move the
Device up the list, or
<-> to move it down
the list
F5
Setup Defaults
79
Advertisement
Table of Contents
