Chapter 7. Transferring The System To A New Disk; General Information - ACRONIS TRUE IMAGE 8.0 User Manual

Hide thumbs Also See for TRUE IMAGE 8.0:
Table of Contents

Advertisement

Transferring the system to a new disk
Chapter 7. Transferring the system to a new
7.1

General information

Sooner or later, many PC users find that their hard disk is too small. If you just
don't have space for more data, you can add another disk just for data storage as
described in the following chapter.
However, you might find that your hard disk does not have enough space for the
operating system and installed applications, preventing you from updating your
software. In this case, you have to transfer the system to a higher-capacity hard
disk.
To do that, you must first install the disk in the PC. Though this operation is
relatively simple, we do not recommend that inexperienced users perform it
themselves; you should have a professional to do it. If you still want to do this
yourself, see Appendix B.
If a PC doesn't have a bay for another hard disk, you can temporarily install it in place of your
CD-ROM. If it's still impossible, you can clone a hard disk by creating its image and restoring it
to a new hard disk with larger partitions.
There are two transfer modes available: automatic and manual.
In the automatic mode, you will only have to take several simple actions to transfer
all the data, including partitions, folders and files, to a newer disk, making it
bootable if the original disk was bootable.
There will be only one difference between these disks – partitions on the newer disk
will be larger. Everything else, including the installed operating systems, data, disk
labels, settings, software and everything else on the disk will remain the same.
Of course, this is the only result available in the automatic mode. The program can only
duplicate the original disk layout to the new one. To obtain a different result, you will have to
answer additional questions about cloning parameters.
The manual mode will provide more data transfer flexibility.
1. You will be able to select the method of partition and data transfer:
• as is
• new disk space is proportionally distributed between the old disk partitions
• new disk space is distributed manually
2. You will also be able to select operations to perform on the old disk:
38
disk
Copyright © Acronis, Inc., 2000–2004

Advertisement

Table of Contents
loading

Table of Contents