ACRONIS TRUE IMAGE 8.0 User Manual page 72

Appendix B Hard disks and BIOS setup
Parameter
Type
Cylinder (Cyl)
Heads (Hd)
Sectors (Sec)
Size (Capacity) MBytes
Mode
(Translation
Method)
72
Value
1-47, Not Type 0 or Not Installed is used when there is no
Installed, hard disk installed (to uninstall it). Type 47 is
Auto reserved for user-defined parameters or for
parameters detected by the IDE Auto detection
utility.
Auto value allows for automatic detection of IDE
disk parameters during the boot sequence.
1-65535 The number of cylinders on a hard disk. For IDE
disks, a logical number of cylinders is specified.
1-16 The number of heads on a hard disk. For IDE
disks, a logical number of heads is specified.
1-63 The number of sectors per track of a hard disk. For
IDE disks, a logical number of sectors is specified.
The capacity of the disk in megabytes. It is
calculated according to the following formula:
Size=(Cyl x Hds x Sct x 512) / 1024 / 1024.
Normal/ Method of translation of sector addresses.
LBA/
Large/Auto
Purpose
Copyright © Acronis, Inc., 2000–2004