Parameter
Parameter
file
Enable Disk Group Security
This command converts a non-secure disk group to a secure disk group.
Syntax
enable diskGroup [diskGroupName] security
Parameter
Parameter
diskgroup
Additional Information
To successfully run this command, the following conditions must be met:
All physical disks in the disk group must be self encrypting disk physical disks.
•
The Physical Disk Security premium feature must be enabled.
•
The storage array security key has to be set.
•
The disk group is Optimal, and it does not have snapshot virtual disks or
repository virtual disks.
164
Script Commands
Description
File path and name of the file that
contains the NVSRAM values. Valid file
names must end with a .dlp extension.
You must put quotation marks (" ")
around the file name.
Description
The alphanumeric identifier (including -
and _) of the disk group that you want to
place in the Security Enabled state.
Enclose the disk group identifier in square
brackets ([ ]).