Create Storage Array Security Key - Dell PowerVault MD3220 Cli Manual

Create Storage Array Security Key

This command creates a new security key for a storage array that has Self
Encrypting Disk (SED) physical disks. This command also sets the security
definitions and sets the state to Security Enabled.
NOTE:
Before you create a storage array security key, you must set the password
for the storage array. Use the setStorageArray command to set the password for
the storage array.
Syntax
create storageArray securityKey
[keyIdentifier=keyIdentifierString] |
passPhrase=passPhraseString |
file=fileName |
commitSecurityKey=(TRUE | FALSE)
Parameters
Parameter
keyIdentifier
passPhrase
file
commitSecurityKey
Description
A character string that you can read that is a
wrapper around a security key.
A character string that encrypts the security key
so that you can store the security key in an
external file.
The file path and the file name to which you
want to save the security key. For example,
file="C:\Program Files\CLI\sup\seckey.slk"
NOTE:
You must add a file extension of .slk to the
end of the file name.
This parameter commits the security key
identifier to the storage array for all SES drives as
well as the controllers. After the security key
identifier is committed, a key is required to read
data or write data. The data can only be read or
changed by using a key, and the drive can never
be used in a nonsecure mode without rendering
the data useless or totally erasing the drive.
Script Commands
147