Enable Raid Controller Module Data Transfer; Enable Storage Array Feature - Dell PowerVault MD3220 Cli Manual

The RAID controller module firmware creates a lock that restricts access to
the SED physical disks. SED physical disks have a state called Security
Capable. When you create a security key, the state is set to Security Enabled,
which restricts access to all SED physical disks that exist within the storage
array.

Enable RAID Controller Module Data Transfer

This command revives a RAID controller module that quiesces while running
diagnostics.
Syntax
enable controller [(0 | 1)] dataTransfer
Parameter
Parameter
controller

Enable Storage Array Feature

This command enables a premium feature using a feature key file.
Syntax
enable storageArray [featurePack | feature]
file="filename"
Description
RAID controller module that you want to
revive. Valid RAID controller module
identifiers are 0 or 1, where, 0 is the RAID
controller module on the left and 1 is the
RAID controller module on the right
when viewed from the rear of the
enclosure. You must put brackets ([ ])
around the RAID controller module
identifier. If you do not specify a RAID
controller module, the storage
management software returns a syntax
error.
Script Commands
165