Start Disk Group Import; Start Enclosure Blink - Dell PowerVault MD3220 Cli Manual

Start Disk Group Import

This command moves a disk group into a Complete state to make a newly
introduced disk group available to its new storage array. The disk group must
be in an Exported state or a Forced state before you run this command. Upon
successfully running the command, the disk group is operational.
NOTE:
Within the disk group, you cannot move virtual disks that are associated
with the premium features from one storage array to another storage array.
Syntax
start diskGroup [diskGroupName] import
Parameter
Parameter
diskGroup
NOTE:
Higher-level virtual disks that are specifically related to premium features
(Snapshot, Remote Virtual Disk Mirroring, Virtual Disk Copy, mapping, and
persistent reservations) are removed as part of the import operation. You must run
the show diskGroup importDependencies command before you run the start
diskGroup import command.

Start Enclosure Blink

This command identifies an enclosure by turning on the indicator LED. (Use
the stop enclosure blink command to turn off the indicator LED for the
enclosure.)
Syntax
start enclosure [enclosureID] blink
Description
Number of the disk group to defragment. You
must put brackets ([ ]) around the disk group
number.
Script Commands
249