HP StorageWorks 12000 User Manual page 81

3. If the library on which you want to add a LAN/WAN replication target appears in the list, select
that library. The Summary for all LAN/WAN Replication Targets screen displays all LAN/WAN
replication targets created for that library.
If the library does not appear in the navigation tree, it means that the library does not yet have
any LAN/WAN replication targets on it. Select LAN/WAN Replication Targets in the navigation
tree instead. The Summary for All LAN/WAN Replication Targets screen displays all LAN/WAN
replication targets created for all libraries.
4. Select Create LAN/WAN Replication Target from the task bar to open the Create LAN/WAN
Replication Target screen.
5. Enter a name for the LAN/WAN replication target.
6. If you did not select your library from the navigation tree, select the library on which you want
to add the target from the Local Library menu.
The Available Slot Ranges section indicates the slots that are available on the library you just
selected.
NOTE:
If you selected your library from the navigation tree, this pull-down field does not appear
because you have already selected the appropriate library.
7. Enter a start slot and an end slot for the copy pool from within the available ranges.
8. Enter the number of maximum simultaneous transfers permitted.
This allows you to limit the replication activity on that target. This field defaults to the maximum
number of transfers allowed by the VLS.
9. Select a Compress option from the pull-down field.
The options are Global Setting, Yes (compression is on), and No (compression is off). See
the Global LAN/WAN Replication Target Configuration
default.
10. Enter a registration password, and then retype it in the next field.
11. Select Add Availability Windows to open a new screen.
This takes you to a new screen.
12. In the Add Availability Window section of the screen, select the day and enter the time the
replication process should begin.
13. Enter the allowable duration of the replication jobs in hours and minutes.
Replication jobs can only begin during the availability window. When the availability window
ends, any replication jobs currently in progress will continue until they complete. No replication
jobs can begin until the next availability window opens.
14. Select Add.
The window refreshes, and the availability window you just added is moved to the Current
Availability Windows section of the screen.
Repeat steps 12 through 14 for as many availability windows as you need.
15. Select Submit.
The screen returns to the selected library's list of LAN/WAN replication targets.
HP StorageWorks 12000 Gateway Virtual Library System User Guide
Settings" on page 82 to set the global
"Setting
81