Management Commands; Cli Management Commands - HP StorageWorks 12000 User Manual

Hp storageworks 12000 gateway virtual library system user guide (ah814-96015, september 2010)
Hide thumbs Also See for StorageWorks 12000:
Table of Contents

Advertisement

Management Commands

Use the CLI commands in
Change the account passwords
Manage cartridges
Restart the VLS device emulations
Save configuration settings
Restore configuration settings
Table 7 CLI management commands
Command
changePassword
editCartridge
restartEmulations
restartCommand-
ViewVLS
restartSystem
shutdownSystem
shutdownNode
saveAllConfig

CLI Management commands

1
Usage
Resets the administrative password, or changes the administrative or user password.
Command View VLS automatically restarts after changing the passwords to make
the changes take effect. Where the options are:
-admin - Reset the administrator password ( -u and -p are ignored) (optional)
-p - Password (no spaces) (optional)
-u - Username (administrator or user). Default is current user. (optional)
-h - Displays command usage information (optional)
Changes parameters on an existing cartridge. Where the options are:
-a <s> - VLS filename of the cartridge (required)
-b <s> - Barcode label of the cartridge (required)
-c <n> - Current capacity of the cartridge in gigabytes (optional). Only required
if changing the cartridge capacity.
-l <s> - Name of library in which the cartridge resides (Library_0, ...) (required)
-nc <n> - Desired new capacity of the cartridge in gigabytes (optional)
-nl <s> - Name of the new library if moving cartridge (Library_1, ..) (optional)
-s<s> - Storage LUN name (SLun_#) (required)
-w - Write protect? (0-read/write or 1-read only) (optional)
-y <n> - Cartridge emulation type (2, 3, ...) (required)
-h - Displays command usage information (optional)
Restarts the VLS device emulations.
Restarts Command View VLS.
Shuts down and restarts the VLS node.
Shuts down the VLS node so it can be powered off.
Shuts down the VLS node so it can be powered off.
Where the options are:
-o <s> - Saves the VLS virtual library configuration and network settings to the
specified external configuration file.
-h - Displays command usage information (optional)
HP StorageWorks 12000 Gateway Virtual Library System User Guide
to:
175

Advertisement

Table of Contents
loading

Table of Contents