Power Supply - HP StorageWorks 12000 User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96015, september 2010)
Hide thumbs
Also See for StorageWorks 12000:
- User manual (266 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
2.
Slide the drive into the bay until it clicks.
Power Supply
CAUTION:
To prevent improper cooling and thermal damage, do not operate the node unless all bays are
populated with either a component or a blank.
1.
Disconnect the power cord from the power supply.
2.
Press the power supply release lever (1), and then pull the power supply from the node.
To replace the component:
WARNING!
To reduce the risk of electric shock or damage to the equipment, do not connect the power cord to
the power supply until the power supply is installed.
1.
Remove the protective cover from the connector pins on the power supply.
HP StorageWorks 12000 Gateway Virtual Library System User Guide
201
Advertisement
Table of Contents
