Removing A Node Hard Drive; Preparing The Node Hard Drive; Installing The Node Hard Drive - HP StorageWorks 12000 User Manual

2. Pull the hard drive (3) out of the node by the latch handle (2).
Figure 39 Removing a Node Hard Drive
.
To replace the component, pull out the latch handle (2) out as far as it can go and slide the drive into
the bay until the latch mechanism engages the chassis. Then, firmly push in the latch handle to lock
the drive in the drive bay.
Figure 40 Preparing the Node Hard Drive
.
Figure 41 Installing the Node Hard Drive
.
HP StorageWorks 12000 Gateway Virtual Library System User Guide 199