Bernina Serger 1150MDA Owner's Workbook page 96

Mastering
Sergers
Your
BERNINA
®
3-Thread Super Stretch Stitch -
Attaching Elastic
Fabric .......................................................... cotton or nylon Lycra, 3" x 6"
Notes
Other ....................................... 12" length of nylon or cotton elastic braid
Needle .................................................... 80/12 Stretch or 75/11 Ballpoint
Thread ................................................................... 2 cones serger thread
.......................................................................... 1 cone YLI Woolly Nylon
Presser Foot ........................................................................... Elasticator
Stitch ..................................................................... 3-thread super stretch
Attach the Upper Looper Converter to the upper looper.
Note: This is an optional accessory for the 700D.
Following the instructions in your owner's manual thread the serger for a
Super Stretch Stitch using Woolly Nylon in the lower looper.
Adjust the stitch length to 4mm.
Increase the presser foot pressure.
Attach the Elasticator Foot. Turn the pressure adjustment screw (on the
roller guide) clockwise to set pressure as desired.
Raise the roller guide and insert the elastic into the slot at the front of the
presser foot.
Place the fabric under the foot and serge, cutting off the fold.
Trim and mount the sample.
BERNINA
®
M Y S 6/2006 96
ASTERING OUR ERGERS
©2006 BERNINA ® of America, Inc.
®
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA Dealers