Bernina Serger 1150MDA Owner's Workbook page 36

Mastering
Sergers
Your
BERNINA
®
4-Thread Overlock Seam
Fabric ....................................................... medium weight cotton, 5" x 6"
Notes
Needle ............................................................................. 80/12 Universal
Thread ............................................................... 4 cones of serger thread
.......................................................................... (yellow, red, green, blue)
Presser Foot .............................................................................. standard
Stitch ............................................................................ 4-thread overlock
Thread the serger for a 4-thread overlock stitch. Adjust settings as
indicated. Fine tune as needed.
Locate the seam guide markings on the knife guard. Measurements
shown are distances from the right needle. When using the left needle,
add 1/8" to measurements.
Tip: Use a permanent marker to highlight the raised markings; this is
particularly useful for those with "mature" eyesight.
Fold fabric in half to 2½" x 6".
Align the fold of the fabric with the ½" mark on the knife guard (the left
needle is being used). Serge the seam, cutting off exactly 3 / ".
8
Trim and mount the sample.
BERNINA
®
M Y S 6/2006 36
ASTERING OUR ERGERS
©2006 BERNINA ® of America, Inc.
®
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA Dealers