Bernina Serger 1150MDA Owner's Workbook page 68

Narrow 3-Thread Overlock using mtc
(for 1300MDC/1150MDA models only)
Fabric ........................................................ medium weight cotton, 6" x 8"
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 3 cones serger thread
Presser Foot .............................................................................. standard
Stitch ................................................................ narrow 3-thread overlock
Divide the fabric into 4 equal sections along the 8" side, finger press
creases into place.
Thread the serger for a narrow 3-thread overlock stitch.
Set the tensions according to the manual for a balanced overlock stitch.
Set the Cutting Width to 4.
Set the mtc lever to the maximum setting, serge on the first fold.
Set the Cutting Width to 2.
Move the mtc lever to the minimum setting, serge on the second fold.
Change the serger settings for a 3-thread Narrow seam.
Set the Cutting Width to 1.
Move the mtc lever to the minimum setting, serge on the third fold.
Mark the sample with Cutting Width and mtc settings:
mtc - maximum/Cutting Width 4 -
mtc - minimum/Cutting Width 2 -
mtc - minimum/Cutting Width 1 -
Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA
Sergers
®
S 6/2006
ERGERS
©2006 BERNINA ® of America, Inc.
Mastering
Your
BERNINA
®
Notes
68
®
Dealers