Brocade Communications Systems 8 Reference Manual page 318

10
iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10
iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10
If set to true, indicates that the initiator must wait for an R2T before sending to the target. If set to
false, the initiator may send data immediately, within limits set by iscsiSsnFirstBurstLength and the
expected data transfer length of the request.
iscsiSsnImmediateData 1.3.6.1.2.1.142.1.1.10.1.1.11
Indicates whether the initiator and target have agreed to support immediate data on this session.
iscsiSsnType 1.3.6.1.2.1.142.1.1.10.1.1.12
Type of iSCSI session:
•
•
iscsiSsnMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.10.1.1.13
The maximum number of outstanding requests-to-transmit (R2Ts) per iSCSI task within this
session.
iscsiSsnFirstBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.14
The maximum length supported for unsolicited data sent within this session.
iscsiSsnMaxBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.15
The maximum number of bytes that can be sent within a single sequence of Data-In or Data-Out
PDUs.
iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16
The number of transport protocol connections that currently belong to this session.
iscsiSsnAuthIdentity 1.3.6.1.2.1.142.1.1.10.1.1.17
This object contains a pointer to a row in the IPS-AUTH MIB module that identifies the
authentication method being used on this session, as communicated during the log in phase. The
value is set to null since there is no IPS-AUTH MIB
300
normalSession - Session is a normal iSCSI session.
discoverySession - Session is being used only for discovery.
Fabric OS MIB Reference
53-1001768-01