Brocade Communications Systems 8 Reference Manual page 279

connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5
The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of
binary 0.
This is the WWN of the port to which the device is connected.
connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6
The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node
is a connUnit in the responding SNMP agency, then the value of this object must be equal to its
connUnitID.
ISL- WWN of the remote switch.
Device- Node name of the device.
connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7
The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value
is nonnegative then it is equal to connUnitPortPhysicalNumber.
ISL- Physical port number of the remote port.
Device: -1.
connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8
The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of
binary 0.
ISL- WWN of the remote port.
Device- Port name.
connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9
The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY, if known;
otherwise, 16 octets of binary 0.
ISL- IP address (IPv4).
Device- 0 (Null).
connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10
If connUnitLinkAgentAddressY is nonzero, it is a protocol address. connUnitLinkAgentAddressTypeY
is the "address family number" assigned by IANA to identify the address format (for example, 1 is
Ipv4, 2 is Ipv6).
ISL- Type 1.
Device- 0 (Null).
Fabric OS MIB Reference
53-1001768-01
connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5
8
261