Brocade Communications Systems 8 Reference Manual page 217

swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5
Get end-to-end count of Fibre Channel words (FCW) transmitted by the port that matched the
SID-DID pair.
swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6
Gets DID information by reference number.
swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7
Gets SID information by reference number. SID (Source Identifier) is a 3-byte field in the frame
header used to indicate the address identifier of the N_Port from which the frame was sent.
swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3
Filter-based monitoring counter.
swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1
Filter-based monitoring counter for given port.
Index swBlmPerfFltPort, swBlmPerfFltRefkey
swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1
This object identifies the port number of the switch.
swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2
This object identifies the reference number of the filter. This reference number is assigned when a
filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key.
swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3
Get statistics of filter-based monitor. Filter-based monitoring provides information about a filter hit
count, such as:
•
•
•
Fabric OS MIB Reference
53-1001768-01
Read command
SCSI or IP traffic
SCSI Read/Write
swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5
5
199