Brocade Communications Systems 8 Reference Manual page 268

8
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7
•
•
•
•
•
For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing,
faulted).
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7
An overall protocol status for the port. For a U_Port, the status should be ols (9).
Values Possible values are:
•
•
•
•
•
•
•
•
•
NOTE
In Fabric OS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is 3 (ok). For a U_Port, the value is 2
(unused) if not faulty with GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty.
In Fabric OS v3.x and above, for an E_Port, F_Port, FL_Port or other Port and online port state, the
value is 3 (ok). For G_Port or other Port and offline port state, the value is 9 (ols). For unknown
portype and offline port state, the value is 1 (unknown).
connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8
The technology of the port transceiver.
Values Possible values are:
•
•
•
•
•
•
•
250
unavailable (1) Do not use.
online (2) Available for meaningful work.
offline (3) Not available for meaningful work.
bypassed (4) No longer used.
diagnostics (5) Map to your testing. (Not supported in Fabric OS v2.6.1.)
unknown (1)
unused (2) Device cannot report this status.
ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed.
warning (4) Do not use.
failure (5) Port is faulty.
notparticipating (6) Loop not participating and does not have a loop address. Do not use.
initializing (7) Protocol is proceeding. Do not use.
bypass (8) Do not use.
ols (9) FCP offline status. (Not supported in Fabric OS v2.6.1.)
unknown (1)
other (2)
unused (3)
shortwave (4)
longwave (5)
copper (6)
scsi (7)
Fabric OS MIB Reference
53-1001768-01