Brocade Communications Systems 8 Reference Manual page 194

5
swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4
Values Possible values are:
•
•
•
•
•
•
•
•
•
•
•
•
swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4
The operational status of the port.
Values Possible values are:
•
•
•
•
•
swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5
The desired state of the port. A management station might place the port in a desired state by
setting this object accordingly.
Based on the port status, this OID returns one of the following:
•
•
•
This OID is settable, the following values can be used to set:
•
•
176
noCard (1) No card is present in this switch slot.
noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC,
SFP, and so on).
laserFault (3) The module is signaling a laser fault (defective GBIC).
noLight (4) The module is not receiving light.
noSync (5) The module is receiving light but is out of sync.
inSync (6) The module is receiving light and is in sync.
portFault (7) The port is marked faulty (defective GBIC, cable, or device).
diagFault (8) The port failed diagnostics (defective G_Port or FL_Port card or motherboard).
lockRef (9) Port is locking to the reference signal.
validating (10) The module is being validated.
invalidModule (11) The module is invalid.
unknown(255) The module is unknown.
unknown (0) The port module is physically absent.
online (1) User frames can be passed.
offline (2) No user frames can be passed.
testing (3) No user frames can be passed.
faulty (4) The port module is physically faulty.
Online -- When queried port is online.
Offline -- When queried port is offline.
Faulty -- When port is in faulty state.
Online -- To change port's state to Online.
Offline -- To change port's state to Offline.
Fabric OS MIB Reference
53-1001768-01