Brocade Communications Systems 8 Reference Manual page 122

3
Fx_Port Configuration Table
Fx_Port Configuration Table
This table contains, one entry for each Fx_Port, the configuration parameters of the ports.
fcFxConfTable 1.3.6.1.3.42.2.1.1.5
A table that contains, one entry for each Fx_Port in the fabric element, configuration and service
parameters of the Fx_Ports.
fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1
An entry containing the configuration and service parameters of an Fx_Port.
Index FcFxConfModuleIndex, fcFxConfFxPortIndex
fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1
Identifies the module containing the Fx_Port for which this entry contains information.
fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2
Identifies the Fx_Port within the module. This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The value remains constant for the identified
Fx_Port until the module is reinitialized.
fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3
The name identifier of this Fx_Port. Each Fx_Port has a unique port name within the address space
of the fabric.
The return value is the WWN of the port.
fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4
The highest or most recent version of FC-PH that the Fx_Port is configured to support.
fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5
The lowest or earliest version of FC-PH that the Fx_Port is configured to support.
fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6
The total number of receive buffers available for holding Class 1 connect-request Class 2 or 3
frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the
attached Nx_Port (if applicable) to Fx_Port.
104 Fabric OS MIB Reference
53-1001768-01