Adjusting the system parameters
4
Press
<1/
~ to switch between "P.lNPUT: ON"
and "P.lNPUT: OFF".
5
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
F •
PHt'~EL
KE ' . , . '
+
Disabling the front panel keys
3
Press
L:::,. /
'V
so that "F.PANEL KEY" is
displayed in the front panel display.
2
Set the operation mode selector to YSP.
You can disable the front panel keys except when you
adjust the system parameters.
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 88.
;1
+
P. INPUT:
o
t·~
*
P. INPUT:
OFF
• Select P.INPUT: ON to enable the INPUT key on
the front panel.
• Select P.INPUT: OFF to disable the INPUT key on
the front panel. "EPANEL KEY" is automatically
set to "ON".
STANDBY/ON
~
The new setting will be activated when you turn on
the power of this unit next time.
•
93
En