Selecting The Input Mode - Yamaha YSP-3000bl Owner's Manual

Selecting the input mode
You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source. This function is available for TV ISTB, DVD, AUX I, and AUX2.
We recommend setting the input mode to AUTO in most cases.
3
Press INPUTMODE repeatedly to toggle
between input modes.
INPUTMODE
q
+
DTS
RUTO
["~X2
RWQ
When AUX2 is selected
as the input source
[T~'ST8
OUTO
TV.···'STB DTS
~
TV"'STB RNRLOG
When TV or STB is selected
as the input source
RUTO
DTS
RUTO
G
U ,:";l
R~Xl
DTS
RUXl RNRLOG
When AUX1 is selected
as the input source
When DVD is selected
as the input source
(U.S.A. and Canada models)
1
Set the operation mode selector to VSP.
Note
ANALOG is not available as the input mode of DVD and
AUX2.
2
Press one of the input selector buttons to
select the desired input source.
~AUX1~
...
;:~
• .
I ~\:~
. .
~l....:lE,l...:
":.::'
":.::'
• AUTO
Automatically selects audio input signals in the following
priority order:
I)
Dolby Digital or DTS
2)PCM
3) Analog
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
~~ti{~
You can adjust the default input mode to be selected when the
power of this unit is turned on by adjusting INPUT MODE in
INPUT MENU (see page 80).
I
87
En