Yamaha YSP-3000bl Owner's Manual page 95

· Adjusting the system parameters
3
Press
L::::.. / "'V
so that "TURN ON VOLUME" is
displayed in the front panel display.
You can test the sound beam output from this unit to
experience the sound beam.
4
Press ENTER.
+
2
Set the operation mode selector to YSP.
3
Press
L::::.. / "'V
so that "DEMO MODE" is
displayed in the front panel display.
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 88.
TUF.:N ON '.,./OLUNE
5 Press ~ / ~ to adjust the initial volume level.
+
Control range: MAX, 99 to 01, OFF
Control step: 1
6
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
STANDBY/ON
~
The new setting for the maximum volume level will
be activated when you tum on the power of this unit
next time.
I
91
En