Yamaha YSP-3000bl Owner's Manual page 17

Controls and functions
@ DISPLAY
Displays information on the selected input signal.
®
Cursor buttons
L::::.. / V" /
<1/1>,
ENTER
Select and adjust SET MENU items.
@ TV INPUT
Toggles between the input source on your TV (see
page 97).
@ CH LEVEL
Adjusts the volume level of each channel (see page 85).
@
TEST
Outputs a test tone when adjusting the output level of each
channel (see page 84).
®
STANDBY/ON
Sets this system to the standby mode (see page 31).
@ Transmission indicator
Lights up when infrared control signals are being output.
@ Input selector buttons
Use to select an input source (DVD, AUXI, AUX2,
AUX3/DOCK, STB, TV, or FMlXM).
®
VOL MODE
Turns on or off the volume modes (see page 67).
CD
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
@ VOLUME+/-
Increases or decreases the volume level of this unit (see
page 47).
@ MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level (see page 47).
®
ENHANCER
Turns on or off the Music Enhancer (see page 66).
*
®
AUTO SETUP
Enters the AUTO SETUP menu (see page 35).
IJ)
Sound field program buttons
Select the sound field programs (see page 63).
CD,...------.
r - - - -......
@
_ - ' - - - - - L . . _
~\~~
You can also control other components using the remote control
once you set the appropriate remote control codes. See
"Controlling other components" on page 97 for details.
This section describes the functions of the remote control
used to control this unit. Some buttons marked with an
asterisk
(*)
share the common functions between the YSP
and TV/AV operation modes
(@).
I
13
En