Cisco QuickVPN - PC Administration Manual page 56

Setting Up and Configuring the WRVS4400N Wireless-N Router
Setting Up Your Wireless-N Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
• Keep Alive: Redial period—Select this option, to have the router
periodically check your Internet connection. If you are disconnected, then
the router automatically reestablishes your connection. To use this option,
click the option next to Keep Alive. In the Redial Period field, specify how
often you want the router to check the Internet connection. This option is
enabled by default and the default Redial Period is 30 seconds. Use this
option to minimize your Internet connection response time as it is always
connected.
L2TP
In European countries that provides this service, select L2TP from the Internet
Connection Type drop-down menu to use the Layer 2 Tunneling Protocol (L2TP)
service that tunnels Point-to-Point Protocol (PPP) across the Internet. Check with
your ISP for the necessary setup information, and enter the following:
• IP Address—Enter the user name and password provided by your ISP. This
is the router's IP address, when seen from the WAN or the Internet.
• Subnet Mask—Enter the subnet mask provided by your ISP along with your
IP address. This is the router's Subnet Mask.
• Gateway—Enter the default gateway IP address provided by your ISP.
• L2TP Server—Enter the IP address of the L2TP server.
5
56