Windows 2000 Or Xp Instructions; For The Router's Web-Based Utility - Cisco QuickVPN - PC Administration Manual

Finding Out MAC and IP Addresses

Windows 2000 or XP Instructions

Windows 2000 or XP Instructions
STEP 1
STEP 2
STEP 3

For the Router's Web-based Utility

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the
OK button.
At the command prompt, enter ipconfig /all. Then press the Enter key.
Write down the Physical Address as shown on your computer screen. It is the
MAC address for your Ethernet adapter. This appears as a series of numbers and
letters. The MAC address/Physical Address is what you will use for MAC address
cloning or MAC filtering.
For MAC address cloning, enter the MAC Address in the MAC Address field or
select Clone My PCs MAC.
Click Save Settings to save the MAC Cloning settings or click the Cancel
Changes button to undo your changes.
D
217