Setting Up and Configuring the WRVS4400N Wireless-N Router
Viewing Status
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
•
Start IP Address—Displays the beginning of the range of IP addresses
used by the DHCP Server.
•
End IP Address—Displays the end of the range of IP addresses used by the
DHCP Server.
•
DHCP Client Table button—Click to open the DHCP Client Table window,
which shows you which personal computers have been assigned an IP
address from the router's DHCP server. You see a list of DHCP clients
(personal computers and other network devices) with the following
information: Client Host Name, IP address, MAC address, and the length of
time (in second) before its assigned IP address expires.
•
ARP/RARP Table button—Click to open the ARP/RARP Table window,
which shows you the ARP/RARP Table on the router. The ARP/RARP Table
provides IP address to MAC address mapping. On the ARP/RARP Table
window, you see a list of address mapping between IP (layer 3) and MAC
(layer 2).
5
164