Cisco QuickVPN - PC Administration Manual page 111

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Firewall Settings
STEP 3
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
• Application—Enter the name of the application you wish to configure.
• Triggered Range—For each application, list the triggered port number
range. These are the ports used by outgoing traffic. Check with the Internet
application documentation for the port number(s) needed. In the first field,
enter the starting port number of the Triggered Range. In the second field,
enter the ending port number of the Triggered Range.
• Forwarded Range—For each application, list the forwarded port number
range. These are the ports used by incoming traffic. Check with the Internet
application documentation for the port number(s) needed. In the first field,
enter the starting port number of the Forwarded Range. In the second field,
enter the ending port number of the Forwarded Range.
• Enabled—Select Enabled to enable port range triggering for the relevant
application.
Click Save.
5
111