Appendix C: Configuring A Gateway-To-Gateway Ipsec Tunnel - Cisco QuickVPN - PC Administration Manual

Configuring a Gateway-to-Gateway IPSec
Tunnel
Introduction
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
This appendix describes configuring IPSec with a computer that is using Windows
2000 or Windows XP. It includes the following sections:
• "Introduction" on page 211
• "Environment" on page 212
This appendix explains how to configure an IPSec VPN tunnel between two VPN
routers by example. In this example, two personal computers test the liveliness of
the tunnel.
You can think of VPN Router1, the Internet, and VPN Router2 as a big virtual router
that connects PC1 on LAN1 and PC2 on LAN2.
C
211