Configuring The Key Management Settings For Vpn Router 2; Configuring Pc 1 And Pc 2 - Cisco QuickVPN - PC Administration Manual

Configuring a Gateway-to-Gateway IPSec Tunnel

Configuring PC 1 and PC 2

Configuring PC 1 and PC 2
STEP 1
STEP 2
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

Configuring the Key Management Settings for VPN Router 2

For VPN Router 2, follow the same instructions as you did for configuring VPN
Router 1.
Set PC 1 and PC 2 to be DHCP clients (refer to Windows Help for more
information).
Verify that PC 1 and PC 2 can ping each other (refer to Windows Help for more
information).
If the computers can ping each other, then you know the VPN tunnel is configured
correctly. You can select different algorithms for the encryption, authentication,
and other key management settings for VPN Routers 1 and 2.
C
215