Table of Contents
Advertisement
Programming your telephone
Programming the Hotkey
The Hotkey is a freely programmable key where up to 6 numbers/names or functions can
be stored. You can even store whole operating sequences using the macro language.
Storing numbers/names under the Hotkey
M
M
1
4
7
Note
The program jumps directly to the Hotkey Programming when you "Long click" the
Hotkey.
32
2
3
5
6
8
9
0
Press the M- key repeatedly in programming
mode until "Keys" appears.
Press the Foxkey under "Keys".
Press the Foxkey repeatedly under " " until
"Hotkey" appears. After pressing the Foxkey
under "Ok" the strings "HotkeyPrg." and
"Hk1", "Hk2" will appear.
Press the M-key one or two times to call the
memories "Hk3" and "Hk4" or "Hk5" and
"Hk6", respectively.
Select the desired memory (Hk1...Hk6) by
pressing the Foxkey.
Confirm again with "Ok" in the menu
"Number : Nr.".
Enter the number, acknowledge by pressing
"Ok" and enter the name.
Press the Foxkey under "Ok" to have the entry
stored in memory.
20317845en_ba_a0
Advertisement
Table of Contents
