Table of Contents
Advertisement
Safety advice
Important information
There is a constant code exchange between radio base and handset to ensure that no one
with another handset can telephone at your expense. If the codes do not match, the call
is disconnected or no connection is established.
Locking the keypad
Your handset can be locked to prevent the accidental activation of keys. You can still re-
ceive calls using the Call key. The keypad must be unlocked before outgoing calls can be
made.
Changing the code/password
When the handset is turned on for the first time, the code/password is "0000". We rec-
ommend that you immediately programme a personal code consisting of 2 to 10 digits so
the personal settings of your handset and the data stored in it are protected from unau-
thorized use.
Batteries
The handset is supplied with two rechargeable batteries.
•
Using other types of batteries or non-rechargeable batteries/primary cells may be
hazardous and could cause your phone to malfunction or be damaged.
•
Always insert the batteries in the correct position!
•
Do not immerse batteries in water or throw into a fire.
•
For the charging base and for direct charging
provided with the telephone.
•
The batteries must be charged for at least 9 hours without interruption before being
used for the first time.
Notes
•
Batteries may become warm during charging; this is normal and perfectly safe.
•
It takes several days for batteries to reach their full capacity and thus the full standby
and calling time.
After a prolonged period of non-use as a result of a power shutoff (e.g. while you are on
holiday), the handset (i.e. the batteries) should be recharged prior to being used again.
Please dispose of defective batteries correctly (they are not household refuse).
1) Office 130pro only
6
1)
use only the plug-in power supply
20317845en_ba_a0
Advertisement
Table of Contents
