Table of Contents
Advertisement
Programming your telephone
Macro language
The macro language allows you to store several functions in succession under one key.
Seizes line
Hangs up receiver (disconnect)
Pause (1 second)
Inserts the number entered/displayed in dialling preparation
Activates control key
Switches Tone Dial Mode ON/OFF
Redials last number dialed
Examples:
Seize and call internal subscriber 201
Seize, divert call to internal subscriber 201, and hang up receiver.
Programming the text display for idle state
You can programme text string for the display in idle state instead of just displaying the
time and date.
Note
A "Long Click" of the C/End key (min. 2 seconds) takes you straight back to the previous
menu.
30
Press the Foxkey under "Text" in programming
mode and enter text (maximum of 15
characters).
Press the Foxkey under "Ok" to store the input in
the memory.
Edit the standby text (if necessary).
C
The correction key (C/End) can be used to delete
the characters to the left of the cursor.
After editing the standby text, press the Foxkey
under "Ok".
20317845en_ba_a0
Advertisement
Table of Contents
