Table of Contents
Advertisement
Installation and putting into service
Installation and charging of battery packs in handset
Installing the batteries
1. Remove the battery compartment cover of the handset by applying light pressure
to the lateral ribs and then pulling it downward.
2. Insert the two batteries in the compartment as indicated in the figure. Make sure
the poles are placed as shown in the compartment.
3. Slide the cover to the handset battery compartment over the batteries until it snaps
audibly into place.
Warning
When inserting the batteries be sure to maintain correct polarity as shown. Incorrect inser-
tion of the batteries may damage your handset.
Charging the batteries
The batteries are delivered uncharged. To charge them, place the handset in the charging
base.
For direct charging (charging the batteries without the charging base) connect the plug-in
power supply directly to the handset
One battery charge lasts
Charging takes
Note
Press "Long click 6" to show the charge state. After a change of batteries, reliable
information on the charge state is only available after 10–15 minutes charge time.
1) Office 130pro only
20317845en_ba_a0
1)
.
for approx.
120
for approx.
12
approx.
1
approx.
4
hours of standby or
hours of talk time
hour for 1 day in use
hours for a full charge
9
Advertisement
Table of Contents
