McAfee DR SOLOMON S ANTI-VIRUS 8.5 User Manual page 180

Using the Dr Solomon's Anti-Virus application
2. Click the Schedule tab to specify when the task should run. Select the
Method 3: Starting a scan task from a settings file
You can use any settings file you've saved with your own configuration
options to start the Dr Solomon's Anti-Virus application.
Follow these steps:
1. Locate and double-click a settings file that you saved from the Dr
180 Dr Solomon's Anti-Virus
You can:
• Start one of the preset tasks in its default configuration. Select a
task in the task list, then click
task is set to start automatically, the Dr Solomon's Anti-Virus
application window will open and the task will run immediately. If
the task is not set to start automatically, the window will open, but
you must click Scan Now to start the operation.
• Create and schedule a new task of your own. Click
Console toolbar to open the Task Properties dialog box. Name your
task, choose security options for it, specify how you want it to
appear when it runs and what you want it to do when it finishes. To
set configuration options for the task, click the Configure button at
the bottom of the property page. To learn about how to configure
your scan task, see
application options" on page
Enable task checkbox to ready it to run at the scheduled time. To learn
how to set a schedule for the task, see
Solomon's Anti-Virus application window.
This reopens the Dr Solomon's Anti-Virus application window and loads
the configuration options you saved
Figure 5-4. Dr Solomon's Anti-Virus Advanced window
in the Console toolbar. If the scan
"Configuring Dr Solomon's Anti-Virus
228.
"Enabling tasks" on page
(Figure
in the
223.
5-4).